Bought this original GM Pollen Filter from GM, Hatyai SC.
Replacement step:
1. Remove the lower trip cover for aircond duct underneath the front passenger dashboard. Here you need to unfastened 2 unit clips and unscrew 2 unit fasteners using T20 torx screw driver.
the clips
2. Then, you need to remove the glovebox. Unscrew 3 units fasteners using T20 torx screw driver located on top and at side of the glove box.
3. There are another 2 fasteners located at the bottom of glovebox that you need to unscrew.
4. After dismantle the glovebox, it will look like this..you can see the pollen filter housing, but you need to dismantle the lower metal support to get access to open the pollen filter door housing.
Don't forget, before taking out the glovebox- detact the glovebox light receptacle.
5. Dismantle 4 fasteners using size 10mm socket and unclip the trim clip.
my advise, the unfastened the 2 left side fastener..it's better to removed the lower trim cover of side sill as this will provide space for socket.
6. Disconnect the air cond duct for foot. Then, you can see the pollen filter housing.
7. Pollen filter housing. Unclip 5 clip pin to open the housing door and you can see the filter inside
8. See the different...after 23,000km running
9. Make sure you install new pollen filter in the correct direction
10. Reinstall in reverse direction then..
